Wolfgang Total Swirl Remover 3.0 New Formula

Wolfgang Total Swirl Remover 3.0 <font color=red>New Formula</font>
Item# WG-N8600
$34.95

Product Description

Wolfgang Total Swirl Remover 3.0 by Menzerna is an all-in-one swirl remover that finishes like a polish. Remove 2000 grit sanding scratches, oxidation, and swirls - all with one polish. Wolfgang Total Swirl Remover 3.0 is made by Menzerna of Germany to Wolfgang's specifications.

Wolfgang Total Swirl Remover 3.0 is an aggressive swirl remover with the gentle touch of a shine-enhancing polish. A truly unique breed of abrasives that level paint without scratching. Wolfgang Total Swirl Remover 3.0 starts improving the paint immediately and leaves the paint noticeably smoother and shinier, even before the finishing polish is applied.

Wolfgang Total Swirl Remover 3.0 takes a direct route to a perfect finish. Specially milled abrasives developed by Menzerna work to eliminate imperfections without creating new ones. These small abrasives are milled for consistency. As they smooth over a scratch, the abrasives diminish at the same rate because they all started at the same size. The result is smooth paint in fewer steps.

One polish can do it all. Wolfgang Total Swirl Remover 3.0 cuts like a light duty compound but finishes like a polish. Remove 2000 grit scratches, oxidation, and swirls on any type of paint, and leave a smooth, wax-ready finish.

16 oz. (437 ml.)


Machine Application:

1 - Clean and dry the vehicle. Apply Wolfgang Total Swirl Remover 3.0 out of direct sunlight.

2 - Depending on the condition of the paint, choose a polishing or light cutting pad. (Only step up to the cutting foam if the light cutting foam does not work.) Apply a bead of Wolfgang Total Swirl Remover 3.0 to the vehicle or to the pad. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.

3 - Polish at 1200-1800 RPM (5 or 6 on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defect has been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.

4 - Wipe the polished area with a damp microfiber cloth.

5 - If necessary, follow with Wolfgang Finishing Glaze 3.0 to completely restore the gloss.

6 - Always apply a wax or sealant after compounding or polishing. Wolfgang Deep Gloss Paint Sealant seals in the shine with its long-lasting polymer formula. Wolfgang Füzion Wax is a blend of carnauba wax and polymers that offers long-term protection with a traditional paste wax feel.

Accessories